Our new Saw Machine is the latest in our quest for the most efficient burying machine. We built this machine to saw through soil, roots, grass, fabric, and new laid sod with virtually no trace. The saw makes a narrow slit and the follower blade places the wire 5-7 inches deep. The turf tires drive directly over the slit, closing the lawn immediately as it drives along. Also, this being our newest design, it can maximize pet play area by burying the wire as little as one inch from an existing fencing or wall.

With this machine, you can be sure your wire loop will be as safe as possible for years to come.

If you have excessively rocky soil, our Vibratory Machine is the answer to your installation problems. We designed this tractor to vibrate rocks to the sides while burying the wire 5-7 inches to ensure its safety. While most saw machines simply ride the wire over the rock, we are able to protect the wire by hammering the rocks out of the way. With our Vibratory Machine, you can rest easy knowing that your pet and your fence will be safe from costly wire breaks.

To sum up, both of our uniquely designed tractors allow us to bury wire much closer to existing fences or walls than any other machine made, creating the maximum play area for your pet.

Concerned about cutting your driveway?

Maybe we can drill under!

Our specialized machinery can drill under most driveways to save it from future service calls. Exceptionally long driveways heat up and cool down constantly, causing stress that can widen the slit in a driveway that has been cut. Even the most carefully cut driveway, with complete sealing can fail over time. Drilling under causes little or no stress to the driveway.

Our method ensures the driveway stays intact, and the wire never surfaces to be cut by lawnmowers, snow shovels, or snowplows.  Take a look here.

These are our specially designed tractors to bury the wire 10″ to 15″ deep in cases where deeper burial is needed! We like the Cockshutt because it has a low gear, wide tires, and is very reliable. All these features translate into an installation which keeps the ground from becoming torn up, leaving very little trace of an installation.  If you have a farm or a property where deeper burial is needed, the Cockshutt is up to the task!

Canine Safety Systems has created many custom-made hand tools that bury fast and deep in all kinds of terrain. Many lawns have delicate flowerbeds and other difficult areas to bury the loop wire. Not all of these areas can be reached by a burying machine. Hand burying with a flat spade shovel can work, but the proper depth is usually sacrificed because of the time and effort it takes to place the wire in the slit by hand.

Stapling the wire down with landscaping staples in these areas is not very reliable either, because the staples will always raise up over the winter months, along with the wire, causing costly wire damage in the spring.

So, to solve these problems we have designed our “Walking Bar” which lays the wire 3 to 9 inches deep, while closing the trench slit as we walk behind it. It is fast, clean, deep, and uses no clumsy machines to mangle flowerbeds or topple down embankments. The “Walking Bar” makes it easy for us to bury the loop wire in garden loops faster, cleaner and deeper than ever before, resulting in a drastic reduction in wire breaks in the spring